

Here you have: https://ntfy.sh/
And because it is you you launch the connection is pretty secure… Assuming telegram servers are not compromised…


Here you have: https://ntfy.sh/
And because it is you you launch the connection is pretty secure… Assuming telegram servers are not compromised…


Seems like a very reasonable reason to switch to another isp well established in the 21st century


Fuck, there is a law in internet (which name I cannot recall) about the impossibility of distinguish an ironic message.
I felt in that trap completely!!


Cable quality only matters in long distances, when the dumping of the signal is noticeable.
If the distance is so short that there is not any voltage drop and still out powering the external noise. There is in effect no influence


What a lot of nonsense. Of course the technology exists and of course it can be done. But in reality is not done because it simply doesn’t bring any benefit.
And in addition a address translation is not nat ™ because the server can be hit from the outside.
Today in ipv4 we have likely 2 Nats, 1 after your router and the other by the carrier (cgnat) and ipv6 those are non existent


Ipv6, get an ipv6. There is not nat in ipv6


Kasm, you only need kasm.
It is a docker engine with the streaming already incorporates. Try that.
It is true that it relies in wine, so perhaps you will need to experiment a bit and pin down a specific wine version. But if I recall correctly I saw an old version of ms office running in wine


Are both of them ula addresses? (both of them starting with 2). If they are not the same then the ISP is providing an internal unique address for isp internal configurations.
If so, are they having the same network? ( The first 48 bits) if not, then is probably a miss configuration but probably in their side. But with no practical effects. You could ignore it.
If yes again, then it is a miss configuration and it shouldn’t happen, but this time it could be in your side, check that the dhcpv6 daemon doesn’t try to give an ipv6 address To your Wan port


Honestly, every hw that is not going automatically into a power save mode when not used is utterly crap, even my home grade switches are able to do so.
So, the only thing you need to do is to buy recent hw and of course not over size your hw necessities. But recent hw tends to be more expensive, so in the end, it is an excel driven decission.
And once this is said, be careful, some hw suffer more for a on/off cycle than from a continuous power on mode. Think in hdd power cycles or condensation/ salt-rust problems in high humidity areas.


Still it is not clear to me how the internal reverse proxy may get a valid certificate when the domain name is pointing to the vps. Do you copy later manually to the internal proxy?
And if so, how do you overcome the invalid certificate warning when you are accessing your services locally?


Question, how do you deal with the certificates if you have an external vps doing passthroy?
Because that certificate will not match the domain name of the vps and then everything will fail or at least trigger a lot of alerts.
I really fail to see how an internal backend in a different subnet can send the right certificate


Ey! congrats for the donation. I hope your personal project succeeds!


This could be funny if you have a d event computer, specially for od games
If you are interested in the photo storage then start… With the storage.
So pick up a nas or something similar, pay a bit more for the super intuitive fancy gui product and the start from there.
Learn what is nas and how to connect to a pc Thne learn how to do the same with your smartphone Then learn a bit about networking Then… Continuous for the hardest itch and try to Scratch it
And if you need support, come back here, check videos and web pages or even chatgpt, for the basic stuff is quite acceptable


You need to start reducing your fingerprint on internet.
The only reliable way to do so is selfhosting your stuff.
There are a few communities here in lemmy, so check on them
The only thing I can tell is that it is totally worthless.
Because you can not have an uga ipv6, then obviously you will have an ula served via dhcpv6 with ipv4 local address (double stack).
And in this point you will realize that most computers implementation select which ip address to use following prio: ipv6 uga -> ipv4 -> ipv6 ula
So even if you do all the things right, your clients will not use it because ipv4 is there and you cannot deselect it because I assume you still want connectivity
Funny, right? :)